Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_mips32.ipk
Size: 23543
SHA256sum: 406927bc7e7cd1be4aca6d127df79b9af04e14e125e46c2c9ba7e014aecdf262
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: alfred_2024.3-r1_mipsel_mips32.ipk
Size: 27867
SHA256sum: 7a409be070df663a92777aeade77664cd20aca47614bb886d0eab5b8a8640916
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_mips32.ipk
Size: 4654
SHA256sum: 6b2929591ea4c57e3d6e6df387338021bcadc986f24b4eb30bc702c46f366b34
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r2_mipsel_mips32.ipk
Size: 63883
SHA256sum: fd98a05dc99197dd606d8bb3f21e1495135f985437e839d841f3efa86ca7ced4
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mipsel_mips32.ipk
Size: 43002
SHA256sum: 522cd2a2af48101011e3a91f33a99e32020f91f8c0419488e653c7a292f01eed
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mipsel_mips32.ipk
Size: 50292
SHA256sum: 1565c0bc29201af0e9bb85a8abb12872b079be82ef158ac960e9efbeb70f4ee5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mipsel_mips32.ipk
Size: 14537
SHA256sum: d40aa098bb66bf7c6471c1e01e3e2699c9908f1c91b552514fb51254273d8473
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_mips32.ipk
Size: 40175
SHA256sum: cf44c225872d8efbbe30cbf777a91ac832a54f5314a2dff766523aa7ee603331
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 1136640
Filename: bird2_2.16-r1_mipsel_mips32.ipk
Size: 413568
SHA256sum: 333d2db49c2cdd6355a543a50feee27935034d2653b93631aa7323993a541b86
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2c_2.16-r1_mipsel_mips32.ipk
Size: 10889
SHA256sum: b01b3217089ff119176a7825e9700c7188343037a70b5ba4742d72658caf9348
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2cl_2.16-r1_mipsel_mips32.ipk
Size: 9973
SHA256sum: d566fc7942a7a914f3259a24a6f200912b69e493895d9fa6feea9a968330d750
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mipsel_mips32.ipk
Size: 4696
SHA256sum: 5e24140eef3253e59813d950ac21571940dea5290e547470924cb360410d7875
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mipsel_mips32.ipk
Size: 8594
SHA256sum: e677680555d007c7f27e307b5470c39f93391a7f26f8ee76fa4ef439d4b959a1
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mipsel_mips32.ipk
Size: 6111
SHA256sum: da04ec9a8bdd4a033820e3aea9ecf1b02b8e0d301865af31ea8aacdceced242f
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mipsel_mips32.ipk
Size: 10146
SHA256sum: 580e62fefd13b7e2a08cce785190469bfd4ad99d991e6bec4de24ac762c5e694
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mipsel_mips32.ipk
Size: 5637
SHA256sum: 92b05bc7a96c0a90f5e71ec842f581ae0203ea8e0afd498548a62410afc814b8
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mipsel_mips32.ipk
Size: 25865
SHA256sum: b18e3f367e825d1e9e22bd30892bd1b55af1b21369a1eeb2683d26616b916fad
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mipsel_mips32.ipk
Size: 8826
SHA256sum: 10662cbc4170291ad64d5d7e88c8018c88e0be3cbace1bad0648dddbf6ac98c0
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: bmx7_r2024061001-r1_mipsel_mips32.ipk
Size: 175654
SHA256sum: 3a00732a7b18c52188033159271686d68346de2e902b6d309df797ad0201c62d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mipsel_mips32.ipk
Size: 377798
SHA256sum: f671dca74032eacdb2c3fd9a97652103ec9d9532a8c2b432f2d11dc82242ee4d
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mipsel_mips32.ipk
Size: 455014
SHA256sum: 895dddc7299ce88c8f4c3fdb5b703c62452b036b0896789ba5b1d141a4ce7c36
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 1417
SHA256sum: a9805a109a0cd1fc127900672fe99a04e1a6cd653606053b655f89b094d28c03
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 953
SHA256sum: 3478d0ae031c7f2e379156d31287d2bd68d3d7caa17dd45a1565d5e4a3fef2ba
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 938
SHA256sum: f8a3472be76dbe88ae73e0158a69a0995a2808ce0fb21868a458a035a79a991d
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 96896
SHA256sum: fb878428b1e878c0e02093abae6fd8b7e560db6d25db071217f8f3dcf42d25d3
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 106835
SHA256sum: e6c5d91844c8df94bad1ce1111e4a4bbf8de4d736da2c7d526a8672df820d050
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_mips32.ipk
Size: 6581
SHA256sum: 6612f757664091271e0b6a99309fb569830b592ba3f63493a5b51e1bbf80914c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 57618
SHA256sum: 832998b7e1378470eaa875cdb69eff37413c4a9408ff5433a2e24e43b1102cc1
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7785
SHA256sum: 16b03637b1e3915684ff4e26874360134921cd712d761bdeb1bbda8d0babb7e2
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25668
SHA256sum: 6b20ff99ae696c0bf2bfb653e552ab5273878fa733d6205894466ae5e1536150
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_mips32.ipk
Size: 7607
SHA256sum: 97604a7fc918c74673309daef589be126f37f4d8678991a894243763cc63539c
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: d5f0d90fa526db14cb5c78265a2062aa2746281b982052a3c111a33ad2b33201
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mipsel_mips32.ipk
Size: 31458
SHA256sum: 856d5ce41a349719100c3a9ac4a2cb54391ef99163b9cc9c79242b1eb24b76ef
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mipsel_mips32.ipk
Size: 46212
SHA256sum: e9224544fc23008d36087fa519483649b6a316e870e8608f54d4a0a3cbce2cc7
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 12017
SHA256sum: e2a92c302a9bc8870f7dd1fd0b20cbddef8e6836a16dd910479ed729a9444a44
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 2726
SHA256sum: d8cdd7b2091263d268833dd66891c493e41787fd3b5d9bf8ea98f81a5d9b87d3
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 12707
SHA256sum: 9c2d27367467a36dbcc6e1316172cc320f2bfc37c227f2eefaa86745b5c2a75d
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 4453
SHA256sum: 7a76ea9e1fb85dcae41285127425e3ddbac939eefd9da4ab678a5c8f09d0972b
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3056
SHA256sum: c0a85a74d887f0c4cbbb35e6ba051d2d67c0336620351f248ffba12f235f375a
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 4836
SHA256sum: bb1fce2e6a8491c9f931d8c533434eb5bad9c3a5f1350ea3977bd9c71ab87f69
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3232
SHA256sum: cda76920628fce53e4b29fb4ac5edfcd138d92f2787a1a3ef684cc741451a246
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 31599
SHA256sum: 73826c5ae3fc30e139d14efc05f5c2bd88fd791248b9c364b9fa31808f26d3e8
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 23637
SHA256sum: e4636f0b14cd4198f6b2a4661c596c3a0c2aa1e4788d636c615b010c9f517868
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 9528
SHA256sum: 0ddba3a8607dacc92f2cd945d2e7ffbdd5cf99447a008a70d9df02489b14589d
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 11919
SHA256sum: 5b21d1fb400ec6eaca2738c22603bc24415ecb391ab2c9e95f3d2d369c5208bd
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 13926
SHA256sum: 513945fcd99b4daeabf22d9ca0b9992eb60739484659eb51e08b099756a33809
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 9180
SHA256sum: e0b795678bf22d4a6e126d93ccfee77a803ee793c20e5415891ce00cc3e758d2
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 3585
SHA256sum: cdf2457b88b1865006c456eebdd97ccd425211b151fd623251165ed69265e94e
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 62810
SHA256sum: fcc9a7c06a6f237cba127f1c43043a4f3a7ea2e690e0d0a886b1abe8e2d49a8f
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 6959
SHA256sum: 56d74b645241136abf1f3ff8231e4a146ec1d3c0ca332ae2bf2bf4f5230d2f76
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 11036
SHA256sum: 7ad09a56a1ab5a867c5bbe5710629048a2e44574ddc05e9b0e29bd6eb3a2482c
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 5178
SHA256sum: 4bf5687cfd8072b2bcd843a9ed6f45d27e80156d460d6c600a235150ef3a889a
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 15684
SHA256sum: c5a75fc41e9168314a129c7329994b81f2568682ad62fbddf5cf85c5c6f0b860
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 2405
SHA256sum: 0e4089bc1a5ed03514f9540c889a11d5b3659e7cecc9fbe805930f3827fa562e
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 1948
SHA256sum: 317b6b7edfe54913b35ece5148fb06741cbd16baff8a069b8b1e4d102e85574a
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_mipsel_mips32.ipk
Size: 139069
SHA256sum: 7eee80cfe65f63f2d015be5359c0e1a6a076d984786160d57827a9797cc45192
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 160676
SHA256sum: a2f3f47371fbf6d95e01c8251d9eee85e9dd3dc2fdbb0574b15179799b2c3413
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 156590
SHA256sum: 186add2a22846727a121350b23175fa64f2fb9ac8f34dd37c32aee3b6ec74fc6
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2302
SHA256sum: f22d579cec52f9fb1edd8960f6cd28a52c5a77090c512fbcd20bd7703cd220ec
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_mips32.ipk
Size: 232668
SHA256sum: d4764501b3363c74ed3153d277a45830b58c15a461eeee3279cef6994784e565
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mipsel_mips32.ipk
Size: 159324
SHA256sum: 3d2f62ac8ca8dc9b50db718cef91f115da995482d7c16b8c87836c392c1197ae
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_mips32.ipk
Size: 79389
SHA256sum: 8e7ecb09c25e80aa1f3cb8557ced5bb76b38bf0fb69f52c5b6bb9d7ea4432de6
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_mips32.ipk
Size: 34032
SHA256sum: 45411045e0033742dedeb99975c96a51abdf8dcad776e35ebeb8b92946f9c209
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_mips32.ipk
Size: 11139
SHA256sum: 94ffc5d04bef1cc1e79345000366a06f88edf4a5cafcfcee0245c1802dd10c46
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 9791
SHA256sum: 4bd364109692159c9ef2b48242e9844cb486aab35e27bdea6ad5d49c27548d63
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.